Equipment Rentals

WELDERS

WELDER, MIG WELDER


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: LINCOLN ELECTRIC

Model: SP-135T

4 Hour: $50.00

Daily: $50.00

Weekly: $245.00

Quantity: for a period of
4 hour(s) day(s) week(s)

Additional Information

HAND HELD SHIELD NO CHARGE
###NO GAS IS NEEDED FOR WELDING #####
ACCOUNT # AT LINCOLN 45095
GENERAL DESCRIPTION
The SP-135T is a complete semiautomatic constantvoltage
DC wire feeder / power source arc welder. It
has been designed for workshop, hobby, automotive
and light maintenance. Included is a tap-switch controlled,
single phase constant voltage transformer /
rectifier power source and a wire feeder welding gun
for feeding .023 - .025 (0.6 mm) through .030 (0.8
mm) solid steel electrode. An optional kit is available
for feeding .035 (0.9 mm) Innershield NR-211-MP
flux-cored wire.
The SP-135T is ideally suited for individuals having
access to 120 volt AC input power, and wanting the
ease of use, quality and dependability of both gas
metal arc welding or GMAW (also known as MIG
welding) and the Innershield electrode process (self
shielded flux cored or FCAW). The SP-135T is a
rugged and reliable machine that has been designed
for dependable service and long life.
RECOMMENDED PROCESSES
The SP-135T can be used for welding mild steel using
the Gas Metal Arc Welding (GMAW or MIG, Metal
Inert Gas) single pass process, which requires a supply
of shielding gas, or the flux-cored arc welding
(FCAW) process using Innershield electrode wire.
The SP-135T is configured for use with the GMAW
process as delivered from the factory.
OPERATIONAL CONTROLS
The SP-135T has the following controls as standard:
Control Power ON/OFF Switch, Voltage Control, Wire
Speed Control, Trigger Switch, and a Circuit Breaker.
With the optional Spot/Stitch Timer Kit installed, the
following controls are also included: Mode switch and
Time Control.
DESIGN FEATURES
Operates on 120 volt input no special wiring
required.
Cold electrode until gun trigger is pressed for an
added measure of safety.
Overload protection incorporates both a thermostat
and a circuit breaker.
Quality wire drive with electronic overload protection.
Quick Release idle roll pressure arm is easily
adjusted.
Reversible, dual groove drive roll. Drive roll will
feed .023 .025 (0.6 mm) and .030" - .035" (0.8 -
0.9 mm) diameter wire.
No external shielding gas is required when used
with Lincoln Innershield .035 (0.9 mm) NR -211-
MP electrode.
Accommodates both 4 (100 mm) diameter and 8
(200 mm) diameter spools of wire.
Accepts optional Spot/Stitch Timer Kit.
WELDING CAPABILITY
The SP-135T is rated at 90 amps, 19 volts, at 20%
duty cycle on a ten minute basis. It is capable of higher
output currents at lower duty cycles.
LIMITATIONS
Arc Gouging cannot be performed with the SP-135T.
The SP-135T is not recommended for pipe thawing or
TIG welding.

* Prices and availability are subject to change without notice. Sales tax, delivery and other fees are not included in this price estimate.

* Please call us if you have any questions about our welder mig welder in Hackettstown NJ, serving surrounding communities in Western New Jersey and Eastern Pennsylvania.