WELDERS

WELDER, MIG WELDER

Where to find WELDER, MIG WELDER in Hackettstown

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: LINCOLN ELECTRIC

Model: SP-135T

4 Hour: $50.00

Daily: $50.00

Weekly: $245.00

Quantity: for a period of  
4 hour(s)   day(s)   week(s)  


Additional Information

  • HAND HELD SHIELD NO CHARGE
  • ###NO GAS IS NEEDED FOR WELDING #####
  • ACCOUNT # AT LINCOLN 45095
  • GENERAL DESCRIPTION
  • The SP-135T is a complete semiautomatic constantvoltage
  • DC wire feeder / power source arc welder. It
  • has been designed for workshop, hobby, automotive
  • and light maintenance. Included is a tap-switch controlled,
  • single phase constant voltage transformer /
  • rectifier power source and a wire feeder welding gun
  • for feeding .023 - .025 (0.6 mm) through .030 (0.8
  • mm) solid steel electrode. An optional kit is available
  • for feeding .035 (0.9 mm) Innershield NR-211-MP
  • flux-cored wire.
  • The SP-135T is ideally suited for individuals having
  • access to 120 volt AC input power, and wanting the
  • ease of use, quality and dependability of both gas
  • metal arc welding or GMAW (also known as MIG
  • welding) and the Innershield electrode process (self
  • shielded flux cored or FCAW). The SP-135T is a
  • rugged and reliable machine that has been designed
  • for dependable service and long life.
  • RECOMMENDED PROCESSES
  • The SP-135T can be used for welding mild steel using
  • the Gas Metal Arc Welding (GMAW or MIG, Metal
  • Inert Gas) single pass process, which requires a supply
  • of shielding gas, or the flux-cored arc welding
  • (FCAW) process using Innershield electrode wire.
  • The SP-135T is configured for use with the GMAW
  • process as delivered from the factory.
  • OPERATIONAL CONTROLS
  • The SP-135T has the following controls as standard:
  • Control Power ON/OFF Switch, Voltage Control, Wire
  • Speed Control, Trigger Switch, and a Circuit Breaker.
  • With the optional Spot/Stitch Timer Kit installed, the
  • following controls are also included: Mode switch and
  • Time Control.
  • DESIGN FEATURES
  • Operates on 120 volt input no special wiring
  • required.
  • Cold electrode until gun trigger is pressed for an
  • added measure of safety.
  • Overload protection incorporates both a thermostat
  • and a circuit breaker.
  • Quality wire drive with electronic overload protection.
  • Quick Release idle roll pressure arm is easily
  • adjusted.
  • Reversible, dual groove drive roll. Drive roll will
  • feed .023 .025 (0.6 mm) and .030" - .035" (0.8 -
  • 0.9 mm) diameter wire.
  • No external shielding gas is required when used
  • with Lincoln Innershield .035 (0.9 mm) NR -211-
  • MP electrode.
  • Accommodates both 4 (100 mm) diameter and 8
  • (200 mm) diameter spools of wire.
  • Accepts optional Spot/Stitch Timer Kit.
  • WELDING CAPABILITY
  • The SP-135T is rated at 90 amps, 19 volts, at 20%
  • duty cycle on a ten minute basis. It is capable of higher
  • output currents at lower duty cycles.
  • LIMITATIONS
  • Arc Gouging cannot be performed with the SP-135T.
  • The SP-135T is not recommended for pipe thawing or
  • TIG welding.
* Prices and availability are subject to change without notice. Sales tax, delivery and other fees are not included in this price estimate.

* Please call us if you have any questions about our welder mig welder rentals in Hackettstown NJ, serving surrounding communities in Western New Jersey and Eastern Pennsylvania.